|
CALLKARD
PLUS ONLINE HELP
What
is PhilCom CallKard Plus?
PhilCom CallKard Plus is the first value packed all in one prepaid
kard in Mindanao that you can use for Internet browsing and voice
calls
How
do I use PhilCom CallKard Plus?
For Internet Browsing, all you have to do is to configure your PC
and dial 10291. For NDD and local calls, dial 10251. And for IDD
calls, just dial 10252.
What
is my user name and password?
Username: Serial number@prepaid
Password: PIN Number
What
are the Rates?
Php 0.14 per minute.
Can
I check the balance of the Card?
You can check your card's remaining balance by dialing 10251 and
follow the voice prompt.
Configuring Network Settings
1. Go to Start -> Settings -> Control Panel
2. On the Control Panel, click on Network. If your computer is not
connected to any local-area network (LAN), you should have the following
settings.
| Adapter: |
Dial-up
Adapter (Manufacturer: Microsoft) |
| Settings: |
(Leave
Defaults) |
| Driver
Type: |
Enhanced
Mode |
| Bindings:
|
TCP/IP |
| Advanced: |
Use
IPX header Compression = No |
| Protocol: |
TCP-IP
(Manufacturer: Microsoft) |
| Settings: |
|
| IP
Address: |
Obtain an IP Address Automatically must be checked. |
| DNS
Configuration: |
Disabled
|
| WINS
Configuration: |
Disabled |
| Bindings: |
Client
for Microsoft Networks |
| Gateway: |
None |
| Advanced: |
Default |
Creating
A New Dialer Under Windows 95/98
1. On your Desktop, double-click My Computer, then Dial-Up Networking
2. Double-Click on Make New Connection
3. Type in PhilCom for the name of the computer you are dialing
to.
4. Select the proper modem, click Next.
5 Enter 10291 for the Phone Number. Disregard area code and country
code for local calls. If You are dialing within a PABX system, add
9 or the number that is used to access an outside line to the phone
number you wish to dial into.
6. Click on Next, then Finish.
Dial-Up
Networking Properties
1. Right-click on the newly created dialer and click Properties.
2. Uncheck the option Use Area Code and Dialing Properties.
3. Click the Server Types tab and uncheck all options except for
Advanced Options: Enable Software Compression
Allowed Network Protocols: TCP/IP
4. Click TCP/IP Setting Button. Check the Followinig:
- Server
Assigned IP Address
- Server
Assigned Name Server Addresses
- Use
IP Header Compression
- Use
Default Gateway on Remote Network.
5.
Click Ok.
Creating
A New Dialer Under Windows 2000
1. On your Desktop, Double-click My Computer, Control Panel, then
Network and Dial-Up Connections
2. Double-click on Make New Connection, click Next.
3. Select the option Dial-Up the Internet, Click Next.
4. Select the option I Want To Setup my Internet Connection Manually,
click Next.
5. Select the option I Connect through a phone line and a modem,
click Next.
6. Enter 10291 for the Phone Number.
7. Uncheck the option Use Area Code and Dialing Rules, click Next.
8. Enter the Username and Password found on the back of the card,
click Next.
9. Type PhilCom for the connection Name, click Next.
10. Select the option No, if the computer asks you: Do you want
to set up an Internet Mail account now?, Click Next.
11. Mark the box To Connect to the Internet immediately, Select
this box and then click Finish.
Dialing-In
To PhilCom
1. Under Dial-up Networking, Double-Click on the PhilCom Dialer.
2. Enter The Username and password found on the back of your PhilCom
Callkard Plus Card.
3. Verify the username, password, and the phone number that you
will connect to.
4. Click on the Connect button.
|
